LifeLine Chain Rivet Extractor LL-CRE

The LifeLine Chain Rivet Extractor provides a valuable service by separating the pin from the chain. The LifeLine Chain Rivet Extractor is perfectly sized to slip into your home kit or keep on you whilst out and about and trouble strikes.

Instructions for proper use:

1. Unwind the handle to make room for the chain to be fitted to the tool
2. Unwind the adjustable support screw at the rear of the tool
3. Place the chain on the rear teeth of the tool (nearest the adjustable support)
4. Tighten the adjusting support screw until it comes firmly into contact with the back of the chain
5. Tighten the handle of the tool gently until the tool pin comes into contact with the center of the chain pin
6. If the two pins are not lined up, back off the handle and re-position the chain in the tool (repeat until the two pins are aligned)
7. Now firmly tighten the handle to push the pin out, splitting the chain

Top Features:

• Durable steel construction
• Rubberized handles for grip
• Comes with one replacement splitting pin
• Adjustable chain support screw prevents damage to the chain and the tool
• Suitable for all chains from 6, 7, 8, 9 and 10 speed chains