Aluminium Bike Side Stand, سنادة دراجة

• 【Suitable】The bike kickstand is suitable for most mountain bikes with wheel diameters of 24-29 inches, 700 road bikes, adult bikes, BMX, MTB, sports bikes, city commuter bikes, children’s bikes, and folding bikes.
• 【Stable and Non-slip】The bike kickstand is made of durable aluminum alloy with non-slip rubber pads, which can prevent the bicycle from sliding on wet or smooth surfaces, or prevent the bicycle kickstand from sinking into mud, effectively keeping the bicycle stable stand or park.
• 【Adjustable】Loosen the middle screw of this bicycle kickstand to adjust the length of the side stand, and the length can be adjusted between 13 inches and 15 inches (330-390 mm). The bike kickstand can be installed in the range of pipe diameter: small pipe diameter, 15x26mm; large pipe diameter, 22X30mm.
• 【Easy to Disassemble】 You can use the hex wrench to easily install the bike kickstand on the bicycle.Just loosen the nut that on the back axle of your bicycle, then install this bicycle kickstand into the bolt and tighten the lock nut.

Features
Adjustable: This kickstand for bike suitable for most 24″-27″wheel diameter bicycles,length can be adjustable between 13″- 15″/ 33-39cm.The range of pipe diameters of chainstays that can be installed:small pipe diameter,15x26mm;large pipe diameter,22X30mm.

Stability: The bicycle kickstand can support a bicycle weighing up to 30 kg (66 lb).Non-slip rubber feet are more non-slip and provide higher stability.

High quality: Using anodized aluminium alloy material and rubber, light weight, rust-proof, strong and durable. Rubber gaskets can reduce friction and prevent the bicycle frame from being scratched

Application: It makes your bicycle convenient to parking, a necessity replacement part for the broken kickstand of your bike bicycle or bicycle without kick stand.

How to Install This Kickstand for Bike?
1.Use the hexagon wrench to remove the three screws at the top of the bicycle kickstand
2.Fix the spacers on the proper position of bicycle chainstay tube
3.Attach the bike kickstand to the spacer position and tighten the 3 screws one by one
4.Put down the bike kickstand, and use the hexagon wrench to loosen the screw in the middle of the kick stand and tighten the screw after adjusting to the appropriate height until the bicycle can be supported on the ground steadily.

TIPS
Pay attention to the position of the kick stand .If it is too far forward, the heel will easily be touched when riding.
After adjusting the height of the bike kickstand , please make sure that all the screws are tightened to prevent the parking stand from breaking easily due to uneven force.

Specifications
Color: Black, White
Material: Aluminium alloy, rubber foot
Adjustable Length:Approx.33-39cm/13″-15″
Net Weight:Approx.350g